Match the control manual, machine options, postprocessor and tool procedure before approving a program.
The articles distinguish editorial decision guides, attributed product descriptions and research evidence. Catalogue capabilities and experimental outcomes apply to their stated configurations. Use the editorial policy to interpret source limits and request corrections.
Choose your next step
Choose the question you are working on. These links organize the library; they are not machine operating instructions.
Review machine suitability
Deep Hole Drilling on an Existing CNC: Review the Complete Installation →Choose documented cycles
Drilling Cycle Selection: Controller, Builder, Tool and CAM References →Review CAM and postprocessing
CAM Deep Hole Drilling: From Operation Settings to Posted Motion →Document the program
Deep Hole Drilling Program Library: Store the Released Configuration →Review controller-specific options
DMG MORI ADC: Published Functions and the Programming Handover →Investigate setup problems
CNC Drilling Troubleshooting: Find the First Divergent Event →Review OPC UA machine-tool scope, actual exposed values and job/bore identities before relying on an IIoT export or dashboard.
Compare CAM intent, posted output and observed machine events to localize a programming mismatch before changing the cutting process.
Read the Haas I/J/K progression, work through an assumed depth schedule and distinguish it from sensor-driven adaptive drilling.
Use documented Fusion cycle behaviour to review a CAM handover, with separate verification for Mastercam or NX and the selected postprocessor.
Review which bore axes, tool assemblies and omitted locations the CAM operation actually includes before judging its posted drilling sequence.
Separate the Haas peck mechanism from G98/G99 return levels, and check which documented sequence belongs to the selected drill.
Choose a documented drilling sequence by assigning syntax, machine commands, tool procedures and posted output to their actual references.
Review a custom drilling macro through argument meaning, variable lifetime, evaluation timing and bounded motion rather than a generic code example.
Build a traceable bore-event record with signal origin, time, units and missing-data flags before comparing analytics with inspection.
Build a reusable program package with machine, post, tool, setup and inspection identities, and distinguish proven variants from untested examples.
Choose between a rotating tool, a rotating workpiece and counter-rotation from the job's geometry and the bore's straightness demand, and see what each …
Assess travel, guidance, coolant paths, tool procedures and installed cycles together before assigning a drilling task to an existing machine.
Separate workpiece guide-bush support from drill guidance, then review the actual tool station, fluid connection and front/back operation identities.
Read the January 2026 ADC announcement as a manufacturer report, then identify the installed-version documents needed for a gun-drilling program.
Trace an angled bore from its part-coordinate axis through CAM orientation, posted motion and the executed drilling interval.
Treat an off-centre deep hole as a positioning and clamping problem first: see what the workpiece-stationary configuration unlocks, where a rotating part …