Dated industry coverage
Dated industry reports on deep hole machining products, company developments and research announcements, with original sources and application questions.
Follow developments through their original source dates. Recent-source reports and earlier announcements are listed separately; our publication date does not make an older event new.
Company announcements are attributed. Research entries identify evidence and access limits. Send a source or correction to suggest material for coverage.
Source-date window calculated as of October 12, 2026.
Ordered by the original source date, with our publication date shown separately.
Source October 6, 2026 · Sandvik Coromant
Coverage published October 7, 2026
What Sandvik's October 6 presentation says about the Dura 462 deep-hole assortment, pilot tools and the questions before changing a drilling setup.
Source September 8, 2026 · Mikron Tool
Coverage published October 8, 2026
Mikron's September announcement separates CrazyDrill Non-Ferrous micro-drilling variants by diameter, depth, coolant supply and regrinding eligibility.
Source September 4, 2026 · Sunnen
Coverage published October 7, 2026
A dated manufacturer preview provides a metrology lead; probe access, uncertainty and bore acceptance still require application evidence.
Source September 1, 2026 · UNISIG
Coverage published October 7, 2026
A September 2026 GR-2 announcement links cameras and GrindView software to in-house gundrill grinding. What to ask before buying or upgrading.
Source July 15, 2026 · MAPAL
Coverage published October 8, 2026
MAPAL's second-generation MEGA-Deep-Drill-Alu: announced September programme, length-dependent diameter range, aluminium coatings and MQL context.
Ordered by the original source date, with our publication date shown separately.
Source April 23, 2026 · IFW, Leibniz University Hannover
Coverage published October 7, 2026
Read the IFW–ISF dynoSpan announcement as a tool-development project, with design goals separated from demonstrated production results.
Source April 16, 2026 · Sunnen and TIBO
Coverage published October 7, 2026
What the two manufacturers announced, why their source dates differ, and the questions to resolve for a combined machining proposal.
Source April 1, 2026 · IFW, Leibniz University Hannover
Coverage published October 7, 2026
Archive report
An April 2026 institute announcement on drilling monitoring, with the limits of its public evidence made explicit.
Source January 26, 2026 · DMG MORI
Coverage published October 7, 2026
Archive report
A source-checked brief on DMG MORI's January ADC announcement, separating manufacturer descriptions from independent validation.
Source June 11, 2025 · ECOROLL
Coverage published October 7, 2026
A 2025 manufacturer discussion becomes an application-review checklist for machine integration, bore acceptance and quoted scope.
Source February 10, 2025 · Production Engineering / Springer Nature
Coverage published October 7, 2026
Archive report
A source-checked notice of the 2025 Figure 19 correction, linked to the original BTA study and affected editorial guides.
Source October 17, 2024 · ECOROLL; Oliver Maiß
Coverage published October 7, 2026
Read ECOROLL’s October 2024 cylinder-tube explanation for the distinction between finishing surface quality and correcting an incoming bore path.
Source September 5, 2022 · International Journal of Automation Technology
Coverage published October 7, 2026
Read the original experimental setup before transferring a PEEK small-hole cooling result to another drilling process.
This index lists reports with a verified source date. Research papers, historical cases and undated product analyses remain available through the wider coverage collection. Inclusion is editorial selection, not a complete industry feed.
Browse all coverage types → · Suggest a report or correction →